Skip to main content

NORTH AMERICAN FACILITIES SUPPLY , LLC

Summary

Supplier of maintenance, repair and operating (MRO) products, with operations primarily in North America, building material, fasteners, adhesive, lumber, metal, doors, door hardware, store front doors

Profile

Incorporate State: Texas | Since: | Main/Branch: Branch | Profile views: 4

Address

State: Texas | County: Bell | City: Temple | Address: 1113 SPRING TERRACE LOOP | ZIP Code: 76502-7284 | Map URL: 1113 SPRING TERRACE LOOP TEMPLE TX 76502-7284

Description

Water Supply and Irrigation Systems

Establishments in this category are primarly engaged in operating water treatment plants and/or operating water supply systems. The water supply system may include pumping stations, aqueducts, and/or distribution mains. The water may be used for drinking, irrigation, or other uses.

Masonry Contractors

Establishments in this category are primarly engaged in masonry work, stone setting, bricklaying, and other stone work. The work performed may include new work, additions, alterations, maintenance, and repairs.

Illustrative Examples:

Block laying
Marble, granite, and slate, exterior, contractors
Bricklaying
Masonry pointing, cleaning, or caulking
Concrete block laying
Stucco contractors
Foundation (e.g., brick, block, stone), building, contractors

Roofing Contractors

Establishments in this category are primarly engaged in roofing. This industry also includes establishments treating roofs (i.e., spraying, painting, or coating) and installing skylights. The work performed may include new work, additions, alterations, maintenance, and repairs.

Illustrative Examples:

Painting, spraying, or coating, roof
Sheet metal roofing installation
Shake and shingle, roof, installation
Skylight installation

Siding Contractors

Establishments in this category are primarly engaged in installing siding of wood, aluminum, vinyl, or other exterior finish material (except brick, stone, stucco, or curtain wall). This industry also includes establishments installing gutters and downspouts. The work performed may include new work, additions, alterations, maintenance, and repairs.

Illustrative Examples:

Downspout, gutter, and gutter guard installation
Fascia and soffit installation
Siding (e.g., vinyl, wood, aluminum) installation

Electrical Contractors and Other Wiring Installation Contractors

Establishments in this category are primarly engaged in installing and servicing electrical wiring and equipment. Contractors included in this industry may include both the parts and labor when performing work. These contractors may perform new work, additions, alterations, maintenance, and repairs.

Illustrative Examples:

Airport runway lighting contractors
Fiber optic cable (except transmission line) contractors
Alarm system (e.g., fire, burglar), electric, installation only
Highway, street, and bridge lighting and electrical signal installation
Audio equipment (except automotive) installation contractors
Home automation system installation
Lighting system installation
Cable television hookup contractors
Telecommunications equipment and wiring (except transmission line) installation contractors
Computer and network cable installation
Traffic signal installation
Environmental control system installation
Cable splicing, electrical or fiber optic

Other Building Equipment Contractors

Establishments in this category are primarly engaged in installing or servicing building equipment (except electrical, plumbing, heating, cooling, or ventilation equipment). The repair and maintenance of miscellaneous building equipment is included in this industry. The work performed may include new work, additions, alterations, maintenance, and repairs.

Illustrative Examples:

Automated and revolving door installation
Lightning protection equipment (e.g., lightning rod) installation
Boiler and pipe insulation installation
Machine rigging
Commercial-type door installation
Millwrights
Conveyor system installation
Revolving door installation
Overhead door, commercial- or industrial-type, installation
Dismantling large-scale machinery and equipment
Elevator installation
Satellite dish, household-type, installation
Escalator installation
Vacuum cleaning system, built-in, installation
Gasoline pump, service station, installation

Tile and Terrazzo Contractors

Establishments in this category are primarly engaged in setting and installing ceramic tile, stone (interior only), and mosaic and/or mixing marble particles and cement to make terrazzo at the job site. The work performed may include new work, additions, alterations, maintenance, and repairs.

Illustrative Examples:

Ceramic tile installation
Mosaic work
Mantel, marble or stone, installation
Tile (except resilient) laying and setting
Stone flooring installation
Marble, granite, and slate, interior installation contractors

All Other Specialty Trade Contractors

Establishments in this category are primarly engaged in specialized trades (except foundation, structure, and building exterior contractors; building equipment contractors; building finishing contractors; and site preparation contractors). The specialty trade work performed includes new work, additions, alterations, maintenance, and repairs.

Illustrative Examples:

Billboard erection
Outdoor swimming pool construction
Paver, brick (e.g., driveway, patio, sidewalk), installation
Crane rental with operator
Paving, residential and commercial driveway and parking lot
Sandblasting building exteriors
Fence installation
Scaffold erecting and dismantling
Interlocking brick and block installation
Steeplejack work
Manufactured (mobile) home set up and tie-down work
Driveway paving or sealing

Curtain and Linen Mills

Establishments in this category are primarly engaged in manufacturing household textile products, such as curtains, draperies, linens, bedspreads, sheets, tablecloths, towels, and shower curtains, from purchased materials. The household textile products may be made on a stock or custom basis for sale to individual retail customers.

All Other Miscellaneous Textile Product Mills

This includes establishments primarily engaged in manufacturing textile products (except carpets and rugs; curtains and linens; textile bags and canvas products; rope, cordage, and twine; and tire cords and tire fabrics) from purchased materials. These establishments may further embellish the textile products they manufacture with decorative stitching. Establishments primarily engaged in adding decorative stitching such as embroidery or other art needlework on textile products, including apparel, on a contract or fee basis for the trade, are included in this industry.

Illustrative Examples:

Batts and batting (except nonwoven fabrics) manufacturing
Embroidering on textile products or apparel for the trade
Fishing nets made from purchased materials
Carpet cutting and binding
Sleeping bags manufacturing
Diapers (except disposable) made from purchased materials
Textile fire hoses made from purchased materials
Dust cloths made from purchased fabric
Weatherstripping made from purchased textiles

Hardwood Veneer and Plywood Manufacturing

This includes establishments primarily engaged in manufacturing hardwood veneer and/or hardwood plywood.

Softwood Veneer and Plywood Manufacturing

This includes establishments primarily engaged in manufacturing softwood veneer and/or softwood plywood.

Reconstituted Wood Product Manufacturing

This includes establishments primarily engaged in manufacturing reconstituted wood sheets and boards.

Illustrative Examples:

Medium density fiberboard (MDF) manufacturing
Oriented strandboard (OSB) manufacturing
Particleboard manufacturing
Reconstituted wood sheets and boards manufacturing
Waferboard manufacturing

Wood Window and Door Manufacturing

This includes establishments primarily engaged in manufacturing window and door units, sash, window and door frames, and doors from wood or wood clad with metal or plastics.

Cut Stock, Resawing Lumber, and Planing

This includes establishments primarily engaged in one or more of the following: (1) manufacturing dimension lumber from purchased lumber; (2) manufacturing dimension stock (i.e., shapes) or cut stock; (3) resawing the output of sawmills; and (4) planing purchased lumber. These establishments generally use woodworking machinery, such as jointers, planers, lathes, and routers to shape wood.

Contact

Similar Listings

Browse by Industry